Turbidity Curtain
Turbidity Curtains & Silt Curtains
A turbidity curtain, also commonly referred to as a turbidity barrier, silt barrier or a silt curtain, is used to contain turbidity (sediment and silt) that is stirred up by construction activities taking place in or near bodies of water, dredging operations and rainwater runoff. ABASCO floating turbidity curtains have a series of continuous flotation elements along its top and a fabric skirt hanging below the floats.
The skirt is typically long enough to be within one foot of the bottom and can be used to contain various turbidity. Turbidity curtains & silt curtains are usually made in lengths of 25, 50 or 100 ft and those sections are joined to make one continuous containment barrier that encloses a worksite. These silt curtains also come in three different types, which are all dependent on different applications and environmental variables.
Turbidity Barriers Regulations & Requirements
Our turbidity control specialists will help you conform to all regulations and requirements that might apply to your project, including:
- Clean Water Act
- National Pollution Discharge Elimination System (NPDES)
- State (DOT) Requirements
- Local Regulations
Learn More About ABASCO Turbidity Curtains & Silt Curtains
Applications
ABASCO turbidity curtains have features for various applications including lakes, ponds and other bodies of water. Our materials are of the highest quality and feature reinforcement of all highly stressed areas. We also have furling systems that assist with easy deployment and retrieval. Our specialists will help you select the appropriate curtain grade as well as the optimum installation design for your project, using the following criteria:
- Site conditions and hydrodynamic regime:
- wind
- waves
- current
- water depth
- tides or other changes in water level
- bottom geometry
- bottom composition
- Project duration
- Type of material in suspension
Construction Turbidity Curtain Use
- Dredging
- Bridge construction
- Dam removal and restoration
- Marina/harbor projects (bulkheads, piers, retaining walls)
- Port and terminal projects (groins, dikes, breakwaters)
- Ferry landings
- Pipeline crossings
- Coastal and shoreline restoration and rehabilitation
- Intake construction
Uses for Turbidity Curtains & How They Work
- Construction Sites – Silt and dirt sediments from construction move through the air and eventually land in the surrounding water areas. Turbidity curtains sit in the water and stop silt, dirt, or debris from continuing past the barrier, eventually causing the sediment to settle to the bottom.
- Environmental Remediation – Turbidity curtains can also be used in environmental remediation to prevent toxic chemicals and heavy metals from leaving the worksite.
- Marine Life Protection – Turbidity barriers work to control the release of organics in the water column, which at concentrated levels can be toxic to marine life.
Oil Containment
Construction sites can also create hydrocarbons due to dredging operations. In this case, turbidity curtains should be lined with oil sorbent booms parallel to the curtain. This can be anchored directly to the turbidity curtain and will absorb the hydrocarbons before they can reach the curtain.
If there is a possibility of a great amount of hydrocarbons that could be released, it would be beneficial to have a line of oil containment booms inside the turbidity curtain enclosure. ABASCO’s oil containment booms paired with turbidity curtains creates the optimal situation for your construction site.
Turbidity Curtain Frequently Asked Questions
What factors should be considered when choosing a turbidity curtain?
Multiple variables can determine which curtain you need such as water depth, current, wave height and wind conditions being the primary factors. They are also regulated by government agencies or contractual requirements.
What are some considerations for selecting an anchor system on turbidity curtains or booms?
Multiple variables will determine anchoring requirements just as they are needed to determine the type of curtain but the layout and potential curtain load will have the largest influence.
How many anchors do I need for my turbidity curtain?
ABASCO’s representatives analyze several factors such as anchor loads, wind, bottom conditions and current directions to determine the amount and placement of anchors needed because it depends on each project’s environment.
Should turbidity curtains touch the floor of the containment area?
Usually, you want to keep the curtain 1’ off the bottom during Low Mean Tide (LMT). If you need the curtain to touch the bottom it may need to be modified or upgraded.
What are the options for turbidity curtains if the depth of water is different across the containment area?
ABASCO can manufacture custom-designed curtains with customized tapered bottoms for adjustment and/or furling lines which can adjust depth while in operation.
View Industries Served
Since 1975, ABASCO has provided quality service and products to a variety of industries.
Case Studies
Request a Custom Quote
To request a custom quote, please give us a call or fill out our form and an ABASCO representative will reach out to you soon.
Trusted By
How can we help you today?
Give us a call or fill out the form and an ABASCO representative will reach out to you soon.
- 1-866-214-0617
-
ABASCO, Inc.
8561 E North Belt
Humble, TX 77396, USA